Summit SWC2149 Bedienungsanleitung PDF herunterladen (Seite 7)

PROBLEMS WITH YOUR WINE CELLAR

You can solve many common Wine Cellar problems easily, saving you the cost of a possible service

call. Try the suggestions below to see if you can solve the problem before calling the servicer.

TROUBLESHOOTING GUIDE

PROBLEM POSSIBLE CAUSE

Wine Cellar does not operate. Not plugged in.

The appliance is turned off.

Circuit breaker has tripped or a fuse has blown.

Wine Cellar is not cold enough. Check the temperature control setting.

External environment may require a higher

setting.

The door is opened too often.

The door is not closed completely.

The door gasket does not seal properly.

Turns on and off frequently. The room temperature is hotter than normal.

A large amount of contents has been added to the

Wine Cellar.

The door is opened too often.

The door is not closed completely.

The temperature control is not set correctly.

The door gasket does not seal properly.

The light does not work. Not plugged in.

Circuit breaker has tripped or a fuse has blown.

The bulb has burned out.

The light button is “OFF”.

Vibrations Check to assure that the Wine Cellar is level.

The Wine Cellar seems to make

too much noise.

Some noise may come from the flow of the

refrigerant, which is normal.

As each cycle ends, you may hear gurgling

sounds caused by the flow of refrigerant in your

Wine Cellar.

Contraction and expansion of the inside walls may

cause popping and crackling noises.

The Wine Cellar is not level.

The door will not close properly. The Wine Cellar is not level.

The door was reversed and not properly

re-installed.

The gasket is dirty.

The shelves are out of position.

NOTE: This appliance is intended to be used exclusively for the storage of wine.

1 2 3 4 5 6 7 8 9 10 11 12 ... 15 16

Keine Kommentare

Summit SWC2149 Bedienungsanleitung Seite 7